Skylight Honeycomb Shades: The 2027 Buyer’s Guide
EWAY CASAShare
- Best insulation: honeycomb air pockets plus side channels that seal the edges.
- Best for bedrooms and nurseries: Day & Night dual fabric, soft light by day and blackout at night.
- Best for high ceilings: solar-powered, with no wiring and no electrician.
- Safe by design: cordless, with no loose cords for kids or pets.
1. Why Honeycomb Shades Suit Skylights
Roller and slat blinds tend to sag on sloped glass, leak light at the edges and collect dust. Honeycomb shades avoid all three:
- Insulating air pockets: help reduce heat gain in summer and heat loss in winter, easing the load on your A/C and heating.
- Sealed 4-sided frame: aluminum side channels keep the shade taut at any angle, from flat roofs (0°) to vertical windows (90°), and block light gaps.
- Cordless: tension cables are hidden inside the channels, so there are no dangling cords.
2. Pick Your Fabric
| Fabric | What It Does | Best For |
|---|---|---|
| Light Filtering | Soft, diffused daylight with privacy | Kitchens, living rooms, home offices |
| Blackout | Foil-lined; blocks light and adds a heat barrier | Bedrooms, home theaters, lofts |
| Day & Night (New) | Translucent and blackout fabric in one shade | Nurseries, guest rooms, multi-use rooms |
Day & Night: Two Shades in One
Translucent cellular fabric and foil-lined blackout fabric share one frame. Slide the center rail to mix them: gentle daylight for the morning, full darkness for naps, movie nights or early bedtimes on long summer evenings. One frame, one installation.
See It in Action: Day & Night Transition
3. Choose How It Operates
Skylights are usually out of arm’s reach, so match the control to your ceiling and your home.
| Feature | (A) Manual Wand | (B) Hardwired Electric | ⚡ (C) Wire-Free Solar |
|---|---|---|---|
| Power | None | 110–240V AC | Built-in solar panel + lithium battery |
| Control | Telescopic pole | RF remote or wall switch | RF remote or smart app |
| Wiring | None | Pre-wiring needed | None |
| Frame Depth | 33–40 mm (1.3–1.6 in) | 35–40 mm (1.4–1.6 in) | ≈46 mm (1.8 in) |
| Installation | Quick DIY, about 15–20 min | Needs wiring in place | DIY retrofit, no electrician |
| Best For | Reachable skylights | New builds and renovations | High ceilings, finished homes |
See It in Action: One-Touch Solar Operation
“Very happy with this.. looks great in my garden room with a big recessed skylight. the mounting video was helpful but we had to watch it several times!!”
4. Get the Fit Right
VELUX® Roof Windows
- Find the code: open the sash and read the metal plate (e.g., MK04, M08, CK02).
- Get your recess size: look up the code on the VELUX data sheet and deduct the frame on all four sides. Also measure frame depth.
- Send it to us: our factory applies the right deductions for a clean inside fit.
Custom and Non-Branded Skylights
Send the inside frame width, height and depth. Required depth is about 33–40 mm (1.3–1.6 in) for manual, 35–40 mm (1.4–1.6 in) for electric and about 46 mm (1.8 in) for solar. Widths under 1.0 m (39 in) use internal tension cords; 1.0–1.5 m (39–59 in) add reinforced guide wires to prevent sagging.
VELUX is a registered trademark of VKR Holding A/S. Our shades are compatible products, not affiliated with or endorsed by VELUX.
5. FAQ
Ready to Upgrade Your Skylights?
Made to your measurements and delivered to your door.
Explore Custom Skylight Blinds →




